Cisco 7800 Series Administration Guide

CHAPTER 1
New and Changed Information
• New and Changed Information for Firmware Release 11.2(3)SR1, on page 1
• New and Changed for Firmware Release 11.2(3), on page 1
• New and Changed for Firmware Release 11.2(1), on page 3
• New and Changed for Firmware Release 11.1(2), on page 4
• New and Changed for Firmware Release 11.1(1), on page 5
• New and Changed Features for Firmware Release 11.0(1), on page 5
• New and Changed Features for Firmware Release 11(0), on page 6
• New Information for Firmware Release 10.4(1) SR1, on page 8
• New Information for Firmware Release 10.4(1), on page 8
New and Changed Information for Firmware Release 11.2(3)SR1
New and ChangedRevision
Activation Code Onboarding, on page 35Added a new task to support Activation Code
Onboarding
New and Changed for Firmware Release 11.2(3)
New and Changed SectionsRevisions
Supported Languages for the Phone Display, on page
73
Added Catalan to the supported language list
Report Current Phone Configuration to the
Provisioning Server, on page 78
Updated the --key keyword details and added a note
about RFC 8188-based encryption.
Specify Audio Compliance Standard, on page 140Added new topics to support audio compliance
standards: ETSI and TIA
Enable Users to Configure Features on Line Keys, on
page 157
Added instructions on how to phone users to configure
speed dial and monitor a coworker's line.
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
1

Cisco 7800 Series Specifications

General

Wireless	No
Video Support	No
PoE	Yes, 802.3af/at
Audio Codec Support	G.711, G.722, G.729, iLBC
Network Protocols	SIP, SDP, IPv4, IPv6, UDP, TCP, DNS, TFTP, HTTP, HTTPS, DHCP
Security Features	802.1X, TLS, SRTP
Power Options	PoE
Headset Port	3.5mm
Buttons	Line keys, navigation cluster, softkeys, mute, speakerphone, headset, volume control
Bluetooth	No
Ethernet Switch	Yes, 2-port 10/100/1000
USB Port	Yes, for headset (7875)