5-25
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 5 Configuring Features, Templates, Services, and Users
Configuring Softkey Templates
Configuring Softkey Templates
Using Cisco Unified Communications Manager Administration, you can manage
softkeys associated with applications that are supported by the Cisco Unified IP
Phones 7906G and 7911G. Cisco Unified Communications Manager supports
two types of softkey templates: standard and nonstandard. Standard softkey
templates include Standard User and Standard Feature. An application that
supports softkeys can have one or more standard softkey templates associated
with it. You can modify a standard softkey template by making a copy of it, giving
it a new name, and making updates to that copied softkey template. You can also
modify a nonstandard softkey template.
It is recommended that you use the standard softkey template which excludes
features already assigned to programmable buttons and limits the feature set to the
most commonly used ones. This template reduces the number of softkeys
displayed on the phone at one time, eliminating the need for users to press the
more softkey. For more information, see Modifying Phone Button Templates,
page 5-24.
To configure softkey templates, select Device > Device Settings > Softkey
Template from Cisco Unified Communications Manager Administration. To
assign a softkey template to a phone, use the Softkey Template field in the
Cisco Unified Communications Manager Administration Phone Configuration
page. Refer to Cisco Unified Communications Manager Administration Guide,
Cisco Unified Communications Manager System Guide for more information.
Setting Up Services
The Services button on the Cisco Unified IP Phone gives users access to
Cisco Unified IP Phone Services. These services comprise XML applications that
enable the display of interactive content with text and graphics on the phone.
Examples of services include local movie times, stock quotes, and weather
reports.
Before a user can access any service,
• You must use Cisco Unified Communications Manager Administration to
configure available services.
To Next Page
Loading...
Need help?
General