Cisco 7911G - IP Phone VoIP - Qos Configuration Menu

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-34
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Related Topics
• Displaying a Configuration Menu, page 4-2
• Network Configuration Menu, page 4-7
Network Configuration
The Network Configuration menu displays device-specific network configuration
settings on the phone
. Table 4-16 describes the options in this menu.
Note The phone also has a Network Configuration menu that you access from the main
menu. For information about the options on that menu, see the “Network
Configuration Menu” section on page 4-7.
Table 4-15 QoS Configuration Menu Options
Option Description To Change
DSCP For Call
Control
DSCP IP classification for call control
signaling.
From Cisco Unified Communications
Manager Administration, choose System
> Enterprise Parameters.
DSCP For
Configuration
DSCP IP classification for any phone
configuration transfer.
From Cisco Unified Communications
Manager Administration, choose System
> Enterprise Parameters.
DSCP For
Services
DSCP IP classification for phone-based
services.
From Cisco Unified Communications
Manager Administration, choose System
> Enterprise Parameters.