Cisco 7911G - IP Phone VoIP User Manual

Chapter 6 Customizing the Cisco Unified IP Phone
Creating Custom Phone Rings
6-2
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
– file view*
– file search*
– file get*
– file dump*
– file tail*
– file delete*
Creating Custom Phone Rings
The Cisco Unified IP Phone ships with two default ring types that are
implemented in hardware: Chirp1 and Chirp2. Cisco Unified Communications
Manager also provides a default set of additional phone ring sounds that are
implemented in software as pulse code modulation (PCM) files. The PCM files,
along with an XML file (named Ringlist.xml) that describes the ring list options
that are available at your site, exist in the TFTP server on each
Cisco Unified Communications Manager server.
For more information, see the “Cisco TFTP” chapter in the
Cisco Unified Communications Manager System Guide, Release 6.0 and the
“Software Upgrades” chapter in the Cisco Unified Communications Platform
Administration Guide.
The following sections describe how you can customize the phone rings that are
available at your site by creating PCM files and editing the Ringlist.xml file:
• Ringlist.xml File Format Requirements, page 6-2
• PCM File Requirements for Custom Ring Types, page 6-3
• Configuring a Custom Phone Ring, page 6-4
Ringlist.xml File Format Requirements
The Ringlist.xml file defines an XML object that contains a list of phone ring
types. This file can include up to 50 ring types. Each ring type contains a pointer
to the PCM file that is used for that ring type and the text that will appear on the
Ring Type menu on a Cisco Unified IP Phone for that ring. The Cisco TFTP
server for each Cisco Unified Communications Manager contains this file.

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English