Cisco 7911G - IP Phone VoIP - Obtaining Additional Information about Power

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Providing Power to the Cisco Unified IP Phones 7906G and 7911G
2-6
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Obtaining Additional Information about Power
For related information about power, refer to the documents shown in Table 2-2.
These documents provide information about these topics:
• Cisco switches that work with the Cisco Unified IP Phones 7906G and
7911G
• The Cisco IOS releases that support bidirectional power negotiation
• Other requirements and restrictions regarding power
Table 2-2 Related Documentation for Power
Document Topics URL
Cisco Unified IP Phone Power Injector http://www.cisco.com/en/US/products
/hw/phones/ps379/prod_installation_
guides_list.html
PoE Solutions http://www.cisco.com/en/US/netsol/
ns340/ns394/ns147/ns412/networking
_solutions_package.html
Cisco Catalyst Switches http://www.cisco.com/en/US/products
/hw/switches/tsd_products_support_ca
tegory_home.html
Integrated Service Routers http://www.cisco.com/en/US/products
/hw/routers/index.html
Cisco IOS Software http://www.cisco.com/en/US/products
/sw/iosswrel/products_ios_cisco_ios_
software_category_home.html