Cisco 7911G - IP Phone VoIP

Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
1-28
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Table 1-6 Checklist for Configuring the Cisco Unified IP Phones 7906G and 7911G in
Cisco Unified Communications Manager
Task Purpose For More Information
1. Gather the following information
about the phone:
– Phone Model
– MAC address
– Physical location of the phone
– Name or user ID of phone user
– Device pool
– Calling search space and
location information (if used)
– Number of lines, associated
directory numbers (DNs), and
partitions to assign to the
phone
– Cisco Unified Communications
Manager user to associate with
the phone
– Phone usage information that
affects phone button template,
softkey template, phone
features, IP Phone services, or
phone applications
Provides list of configuration
requirements for setting up
phones.
Identifies preliminary
configuration that you need to
perform before configuring
individual phones, such as phone
button templates or softkey
templates.
Refer to the Cisco Unified
Communications
Manager System Guide,
Cisco Unified IP Phone
chapter.
See the “Telephony
Features Available for the
Cisco Unified IP Phone”
section on page 5-2.
2. Customize phone button templates
(if required).
Adds Privacy feature to meet
user needs.
Refer to the
Cisco Communications
Manager Administration
Guide,
“Phone Button Template
Configuration” chapter.
See the “Modifying Phone
Button Templates” section
on page 5-24.