Cisco 7911G - IP Phone VoIP - Media Configuration Menu

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-28
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Media Configuration Menu
The Media Configuration menu displays whether the speaker capability is
enabled. Table 4-11 describes the options on this menu.
Table 4-11 Media Configuration Menu Options
Option Description To Change
Speaker Enabled Indicates whether the speaker is
enabled for monitoring calls on the
phone.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Wideband
Handset
Indicates whether wideband is enabled
or disabled for the handset.
Default: “Use Phone Default” on Cisco
Unified Communications Manager
Administration. (This default means
that the phone will be enabled for a
wideband handset only if the phone was
shipped with a wideband handset.)
• If Wideband Handset UI Control is
enabled, you or the user can choose
> User Preferences >
Audio Preferences > Wideband
Handset.
• If Wideband Handset UI Control is
disabled, use Cisco Unified
Communications Manager
Administration > Device > Phone >
Phone Configuration to set this
value.
Note If you allowed this option to be
user controllable (in the
Wideband Handset UI Control
option), the user-configured value
takes precedence.