Cisco 7911G - IP Phone VoIP User Manual

4-27
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
“more” Softkey
Timer
Indicates the number of seconds that
additional softkeys are displayed after
the user presses more. If this timer
expires before the user presses another
softkey, the display reverts to the initial
softkeys.
Range: 5 to 30; 0 represents an infinite
timer.
Default: 5.
Access the Phone Configuration page in
Cisco Unified Communications Manager
Administration.
Wideband
Handset UI
Control
Indicates whether the user can
configure the Wideband Handset option
in the phone user interface.
Val u e s :
• Enabled—The user can configure
the Wideband Handset option in
the Audio Preferences menu on the
phone (choose > User
Preferences > Audio
Preferences> Wideband
Handset).
• Disabled—The value of the
Wideband Handset option in Cisco
Unified Communications Manager
Administration gets used (see
Media Configuration Menu,
page 4-28).
Default: Enabled
Use Cisco Unified Communications
Manager Administration > Device >
Phone > Phone Configuration.
Table 4-10 UI Configuration Menu Options (continued)
Option Description To Change

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English