Cisco 7911G - IP Phone VoIP User Manual

4-29
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
NTP Configuration Menu (SIP Phones Only)
The NTP Configuration menu, which opens when you select NTP Configuration
on the Locale Configuration menu, displays information about the NTP server and
mode configuration used by the phone. Table 4-12 describes the options on this
menu. For more information, see Locale Configuration Menu, page 4-24.
Enterprise
Advertise G.722
Codec
Enables/disables Cisco Unified IP
Phones to advertise the G.722 codec to
Cisco Unified Communications
Manager. If enabled (default), and if
each endpoint in the attempted call
supports G.722 in its capabilities set,
Cisco Unified Communications
Manager will choose G.722 for the call.
Note When a phone is registered
with a Cisco Unified
Communications Manager that
does not support this setting,
the default is “Disabled.”
Use Cisco Unified Communications
Manager Administration > System >
Enterprise Parameters.
Device Advertise
G.722 Codec
Allows you to override the Enterprise
Advertise G.722 Codec on a per-phone
basis.
The default is “Use System Default,”
which means the value configured for
the Enterprise Advertise G.722 Codec
parameter gets used.
Use Cisco Unified Communications
Manager Administration > Device >
Phone.
Table 4-11 Media Configuration Menu Options (continued)
Option Description To Change

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English