Cisco 7911G - IP Phone VoIP - Page 124

Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
4-30
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Table 4-12 NTP Configuration Menu Options
Option Description To Change
NTP Server 1 The IP address of the primary NTP
server.
Use Cisco Unified Communications
Manager Administration to modify.
NTP Server 2 The IP address of the secondary or
backup NTP server.
Use Cisco Unified Communications
Manager Administration to modify.
NTP Mode 1 The primary server mode. Supported
modes are Directed Broadcast and
Unicast.
Use Cisco Unified Communications
Manager Administration to modify.
NTP Mode 2 The secondary server mode. Supported
modes are Directed Broadcast and
Unicast.
Use Cisco Unified Communications
Manager Administration to modify.