Cisco 7911G - IP Phone VoIP User Manual

4-33
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
QoS Configuration Menu
The QoS Configuration menu displays information that relates to quality of
service (QoS) for the phone. Table 4-15 describes the QoS Configuration menu
options.
Vo i c e V L A N
Enabled (applies
to 7911G only)
Indicates whether the phone allows a
device attached to the access port to
access the Voice VLAN. Setting this
option to No (disabled) prevents the
attached PC from sending and
receiving data on the Voice VLAN.
This setting also prevents the PC from
receiving data sent and received by the
phone. Set this setting to Yes (enabled)
if an application that requires
monitoring of the phone’s traffic is
running on the PC. These applications
include monitoring and recording
applications and network monitoring
software.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Web Access
Enabled
Indicates whether web access is
enabled (Yes) or disabled (No) for the
phone.
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Security Mode Displays the security mode that is set
for the phone.
Use Cisco Unified Communications
Manager Administration to modify.
Logging Display Used by Cisco Technical Assistance
Center (TAC) for troubleshooting.
The Cisco Unified IP Phone 7911G can
be configured for Enabled/Disabled/PC
Controlled.
The Cisco Unified IP Phone 7906G
supports only Enabled/Disabled (no PC
Controlled).
—
Table 4-14 Security Configuration Menu Options (continued)
Option Description To Change

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English