EasyManuals Logo

Cisco 7941G Administration Guide

Cisco 7941G
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #117 background imageLoading...
Page #117 background image
To ChangeDescriptionOption
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Indicates the loudness setting for the
recording tone that the remote party
receives. The remote party is the party
who is on a call with the party whose
phone has the recording tone option
enabled.
Range: 0 percent to 100 percent. (0
percent is 66 dBM and 100 percent is
3 dBM.)
Default: 84 percent (10dBM)
See Recording Tone in this table.
Recording Tone
Remote Volume
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Indicates the length of time in
milliseconds for which the recording
tone plays.
If the value you configure here is less
than one third the interval, then this
value overrides the default provided by
the Network Locale.
Range: 0 to 3000
For some Network Locales
that use a complex cadence,
this setting applies only to the
first beep tone.
Note
See Recording Tone in this table.
Recording Tone
Duration
If Wideband Handset UI Control is
enabled, you or the user can choose
> User Preferences > Audio
Preferences > Wideband Handset.
If Wideband Handset UI Control is
disabled, use Cisco Unified
Communications Manager
Administration and choose Device >
Phone > Phone Configuration to
set this value.
If you allow this option to be user
controllable (in the Wideband
Handset UI Control option), the
user-configured value takes
precedence.
Note
Indicates whether wideband is enabled
or disabled for the handset.
Default: Use Phone Default on Cisco
Unified Communications Manager
Administration. (This default means
that the phone will be enabled for a
wideband handset only if the phone was
shipped with a wideband handset.)
Wideband Handset
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
97
Cisco Unified IP Phone Settings
Media Configuration Menu

Table of Contents

Other manuals for Cisco 7941G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7941G and is the answer not in the manual?

Cisco 7941G Specifications

General IconGeneral
Keypad number of keys12
Touchscreen-
Display resolution320 x 222 pixels
SpeakerphoneYes
Voice codecsG.729a
BluetoothNo
Supported network protocolsDHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports2
Input voltage48 V
Dimensions (WxDxH)266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorGray
Safety(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
CertificationCE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standardsIEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity- lines
Phonebook capacity- entries
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Weight1600 g

Related product manuals