Cisco 7941G Administration Guide

To ChangeDescriptionOption
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Indicates whether a recording tone is
enabled or disabled for the phone. If the
recording tone option is enabled, the
phone plays the beep tone in both
directions of every call, regardless of
whether the call actually gets recorded.
The recording tone first sounds when a
call is answered.
You may want to notify your users if
you enable this option.
Default: Disabled
Related Parameters:
•
Recording Tone Local Volume
•
Recording Tone Remote Volume
•
Recording Tone Duration
Other related parameters:
the recording tone
frequency in hz, the
length of the recording
tone (called duration),
and how often the
recording tone plays
(called interval)—are
defined on a per-Network
Locale basis in the xml
file that defines tones.
This xml file is usually
named tones.xml or
g3-tones.xml.
Note
Recording Tone
From Cisco Unified Communications
Manager Administration, choose Device
> Phone > Phone Configuration.
Indicates the loudness setting for the
recording tone that is received by the
party whose phone has the recording
Tone option enabled.
This setting applies for each listening
device (handset, speakerphone,
headset).
Range: 0 percent (no tone) to 100
percent (same level as current volume
setting on the phone).
Default: 100
See Recording Tone in this table.
Recording Tone Local
Volume
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
96
Cisco Unified IP Phone Settings
Media Configuration Menu

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g