Cisco 7941G

Configuration referenceDescriptionFeature
For more information, see the option
“Always use prime line for voice message”
in the following chapters of Cisco Unified
Communications Manager Administration
Guide:
• “Device Profile Configuration”
• “Common Phone Profile
Configuration”
• “Cisco Unified IP Phone
Configuration”
When disabled (default), pressing the Messages button
selects the line that has a voice message. If more than one
line has voice mail, then the first available line is selected.
When enabled, the primary line is always used to retrieve
voice messages.
This feature can also be enabled or disabled for
Extension Mobility.
Note
Line select for voice
messages
For more information
•
See Softkey Templates, on page 148.
•
Cisco Communications Manager
System Guide, “Understanding Route
Plan” chapter
Allows users to log out of a hunt group and temporarily
block calls from ringing their phone when they are not
available to take calls. Logging out of hunt groups does
not prevent non-hunt group calls from ringing their phone.
Log out of hunt groups
For more information, see:
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter
•
Cisco Unified Communications
Manager Features and Services
Guide, “Malicious Call Identification”
chapter
Allows users to notify the system administrator about
suspicious calls that are received.
Malicious caller
identification (MCID)
For more information, see Cisco Unified
Communications Manager Administration
Guide, “Meet-Me Number/Pattern
Configuration” chapter.
Allows a user to host a Meet Me conference in which other
participants call a predetermined number at a scheduled
time.
Meet Me conference
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Message Waiting Configuration”
chapter.
•
Cisco Unified Communications
Manager System Guide, “Voice Mail
Connectivity to Cisco Unified
Communications Manager” chapter
Defines directory numbers for message-waiting on and
message-waiting off indicator. A directly connected
voice-messaging system uses the specified directory
number to set or to clear a message-waiting indication for
a particular Cisco Unified IP Phone.
Message Waiting
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
134
Features, Templates, Services, and Users
Telephony Features Available for Cisco Unified IP Phone