Cisco 7941G

Configuration referenceDescriptionFeature
For more information, see Cisco Unified
IP Phone Guide, “Basic Call Handling”
chapter.
Allows a user to dial a number without going off hook.
The user can then either pick up the handset or press the
Dial softkey.
Onhook Predialing
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Call Pick” chapter.
Allows a user to answer a call ringing on a phone in another
group that is associated with the user's group.
Other Group Pickup
For more information, see Cisco Unified
Communications Manager Security Guide,
“Product Security Overview” chapter.
Enables a user to securely access the web with the use of
a phone trust store called “phone-trust.”
Phone secure web access
No configuration required.Allows the user to dial E.164 numbers prefixed with a
“+” sign.
To dial the + sign, the user needs to press and hold the “*”
key for at least 1 second. This applies to dialing the first
digit for an on-hook or off-hook call only.
Plus Dialing
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, “Presence” chapter.
Allows a user to monitor the call state of another directory
number (DN) listed in call logs, speed-dials, and corporate
directories. The Busy Lamp Field (BLF) for the DN
displays the call state.
Presence-enabled
directories
For more information, see “Configuring
PLAR” section in the “Directory Number
Configuration” chapter in
Cisco Unified Communications Manager
Administration Guide.
The Cisco Unified Communications Manager administrator
can configure a phone number that the Cisco
Unified IP Phone dials as soon as the handset goes off
hook. This can be useful for phones that are designated for
calling emergency or “hotline” numbers.
Private Line Automated
Ringdown (PLAR)
For more information, see:
•
Cisco Unified Communications
Manager Administration Guide,
“Cisco Unified IP Phone
Configuration” chapter
•
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter
•
Cisco Unified Communications
Manager Features and Services
Guide, “Barge and Privacy” chapter.
Prevents users who share a line from adding themselves
to a call and from viewing information on their phone
screens about the call of the other user.
Privacy
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
136
Features, Templates, Services, and Users
Telephony Features Available for Cisco Unified IP Phone