Cisco 7941G Administration Guide

DescriptionItem
Host names or IP addresses, in prioritized order, of the
Cisco Unified Communications Manager servers with which the phone
can register. An item can also show the IP address of an SRST router that
is capable of providing limited Cisco Unified Communications Manager
functionality, if such a router is available.
For an available server, an item will show the
Cisco Unified Communications Manager server IP address and one of
the following states:
•
Active: Cisco Unified Communications Manager server from which
the phone is currently receiving call-processing services.
•
Standby: Cisco Unified Communications Manager server to which
the phone switches if the current server becomes unavailable.
•
Blank: No current connection to this Cisco Unified Communications
Manager server.
An item may also include the Survivable Remote Site Telephony (SRST)
designation, which identifies an SRST router capable of providing
Cisco Unified Communications Manager functionality with a limited
feature set. This router assumes control of call processing if all other
Cisco Unified Communications Manager servers become unreachable.
The SRST Cisco Unified Communications Manager always appears last
in the list of servers, even if it is active. You configure the SRST router
address in the Device Pool section in Cisco Unified Communications
Manager Configuration window.
Unified CM 1–5
URL of the help text that appears on the phone.Information URL
URL of the server from which the phone obtains directory information.Directories URL
URL of the server from which the phone obtains message services.Messages URL
URL of the server from which the phone obtains Cisco Unified IP Phone
services.
Services URL
Indicates that DHCP is being used by the phone.DHCP Enabled
Indicates the setting of the DHCP Address Released option on the phone’s
Network Configuration menu.
DHCP Address Released
Indicates that the phone is using an alternative TFTP server.Alternate TFTP
URL that the phone displays when the phone has not been used for the
time specified by Idle URL Time, and no menu is open.
Idle URL
Number of seconds that the phone has not been used and no menu is open
before the XML service specified by Idle URL is activated.
Idle URL Time
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
197
Remote Monitoring
Network Configuration Area

Cisco 7941G Specifications

General

Keypad number of keys	12
Touchscreen	-
Display resolution	320 x 222 pixels
Speakerphone	Yes
Voice codecs	G.729a
Bluetooth	No
Supported network protocols	DHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports	2
Input voltage	48 V
Dimensions (WxDxH)	266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Gray
Safety	(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
Certification	CE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standards	IEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity	- lines
Phonebook capacity	- entries
Number of handles included	1 pc(s)

Weight and Dimensions

Weight	1600 g