Cisco 7941G

DescriptionItem
URL of proxy server, which makes HTTP requests to non-local host
addresses on behalf of the phone HTTP client and provides responses
from the non-local host to the phone HTTP client.
Proxy Server URL
URL that the phone uses to validate requests made to the phone web
server.
Authentication URL
Speed and duplex of the switch port, where:
•
A: Auto Negotiate
•
10H: 10-BaseT/half duplex
•
10F: 10-BaseT/full duplex
•
100H: 100-BaseT/half duplex
•
100F: 100-BaseT/full duplex
•
No Link: No connection to the switch port
SW Port Configuration
Speed and duplex of the switch port, where:
•
A: Auto Negotiate
•
10H: 10-BaseT/half duplex
•
10F: 10-BaseT/full duplex
•
100H: 100-BaseT/half duplex
•
100F: 100-BaseT/full duplex
•
No Link: No connection to the PC port
To configure the setting on multiple phones simultaneously, configure
the Remote Port Configuration in the Enterprise Phone Configuration
(System > Enterprise Phone Configuration).
If the ports are configured for Remote Port Configuration in
Unified CM, the data cannot be changed on the phone.
Note
PC Port Configuration
Backup TFTP server that the phone uses if the primary TFTP server is
unavailable.
TFTP Server 2
User locale associated with the phone user. Identifies a set of detailed
information to support users, including language, font, date and time
formatting, and alphanumeric keyboard text information.
User Locale
Network locale associated with the phone user. Identifies a set of detailed
information to support the phone in a specific location, including
definitions of the tones and cadences used by the phone.
Network Locale
Indicates that the Headset button is enabled on the phone.Headset Enabled
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
198
Remote Monitoring
Network Configuration Area