EasyManuals Logo

Cisco 7941G Administration Guide

Cisco 7941G
292 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #227 background imageLoading...
Page #227 background image
DescriptionItem
Last time at which an RTCP Sender Report was received.Sender Report Time Received
(see note)
RTP packet size, in milliseconds, for the received stream.Rcvr Size
RTP packets received from network but discarded from jitter buffers.Rcvr Discarded
Number of times RTCP Receiver Reports have been received.Rcvr Reports Received
(see note)
Last time at which an RTCP Receiver Report was received.Rcvr Report Time Received
(see note)
Voice Quality Metrics
Score that is an objective estimate of the mean opinion score (MOS) for
listening quality (LQK) that rates from 5 (excellent) to 1 (bad). This score is
based on audible concealment events due to frame loss in the preceding
8-second interval of the voice stream. For more information, see Voice Quality
Monitoring, on page 232.
The MOS LQK score can vary based on the type of codec that the Cisco
Unified IP Phone uses.
MOS LQK
Average MOS LQK score observed for the entire voice stream.Avg MOS LQK
Lowest MOS LQK score observed from start of the voice stream.Min MOS LQK
Baseline or highest MOS LQK score observed from start of the voice stream.
These codecs for the Cisco Unified IP Phones 7962G and 7942G provide the
following maximum MOS LQK score under normal conditions with no frame
loss:
G.711 gives 4.5
G.722 gives 4.5
G.728/iLBC gives 3.9
G.729 A/AB gives 3.8
These codecs for the Cisco Unified IP Phones 7961G/G-GE and 7941G/G-GE
provide the following maximum MOS LQK score under normal conditions
with no frame loss:
G.711 gives 4.5
G.729 A /AB gives 3.7
Max MOS LQK
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Communications Manager 9.0 (SCCP and SIP)
207
Remote Monitoring
Streaming Statistics

Table of Contents

Other manuals for Cisco 7941G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7941G and is the answer not in the manual?

Cisco 7941G Specifications

General IconGeneral
Keypad number of keys12
Touchscreen-
Display resolution320 x 222 pixels
SpeakerphoneYes
Voice codecsG.729a
BluetoothNo
Supported network protocolsDHCP, TFTP, SCCP, DSCP
Ethernet LAN (RJ-45) ports2
Input voltage48 V
Dimensions (WxDxH)266.7 x 152.4 x 203.2 mm
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorGray
Safety(UL) 60950, (CSA) C22.2 No. 60950, IEC 60950, EN 60950, AS/NZS 60950
CertificationCE (FCC) 15 (CFR 47) B ICES-003 B EN55022 B CISPR22 B AS/NZ 3548 B VCCI B EN55024 EN 50082-1 EN 61000-3-2 EN 61000-3-3
Compliance industry standardsIEEE 802.3, IEEE 802.3u, IEEE 802.1Q, IEEE 802.3af
Lines quantity- lines
Phonebook capacity- entries
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Weight1600 g

Related product manuals