Cisco 7961G Administration Guide

Chapter 4 Configuring Settings on the Cisco IP Phone
Network Configuration Menu
4-12
Cisco IP Phone Administration Guide for Cisco CallManager, Cisco IP Phone 7961G/7961G-GE and 7941G/7941G-GE
OL-6966-01
DHCP Enabled Indicates whether DHCP is being
used by the phone.
1. Unlock network configuration options.
2. Scroll to the DHCP Enabled option and
press the No softkey to disable DHCP,
or press the Ye s softkey to enable
DHCP.
3. Press the Save softkey.
DHCP Address
Released
Releases the IP address assigned by
DHCP.
1. Unlock network configuration options.
2. Scroll to the DHCP Address Released
option and press the Yes softkey to
release the IP address assigned by
DHCP, or press the No softkey if you
do not want to release this IP address.
3. Press the Save softkey.
Alternate TFTP Indicates whether the phone is using
an alternative TFTP server.
1. Unlock network configuration options.
2. Scroll to the Alternate TFTP option and
press the Yes softkey if the phone
should use an alternative TFTP server.
Press the No softkey otherwise.
3. Press the Save softkey.
Table 4-2 Network Configuration Menu Options (continued)
Option Description To Change

Cisco 7961G Specifications

General

Brand	Cisco
Model	7961G
Category	IP Phone
Language	English