Hands-Free Profile (HFP)
With Bluetooth Hands-Free Profile (HFP) support, the following features can be available if supported by the Bluetooth
headset.
• Ring
• Answer a call
• End a call
• Volume Control
• Last Number Redial
• Call Waiting
• Divert / Reject
• 3 way calling (Hold & Accept and Release & Accept)
• Speed Dialing
Phone Book Access Profile (PBAP)
Phone Book Access Profile (PBAP) support enables the exchange of phone book objects between devices.
For more information, refer to the documentation from the Bluetooth headset manufacturer.
Coexistence (802.11b/g/n + Bluetooth)
If using Coexistence where 802.11b/g/n and Bluetooth are used simultaneously, then there are some limitations and deployment
requirements to be considered as they both utilize the 2.4 GHz frequency range.
Capacity
When using Coexistence (802.11b/g/n + Bluetooth), call capacity is reduced due to the utilization of CTS to protect the
802.11g/n and Bluetooth transmissions.
Multicast Audio
Multicast audio from Push To Talk (PTT), Music on Hold (MMOH) and other applications are not supported when using
Coexistence.
Voice Quality
Depending on the current data rate configuration, CTS may be sent to protect the Bluetooth transmissions when using
Coexistence.
In some environments, 6 Mbps may need to be enabled.
Note: It is highly recommended to use 802.11a/n/ac if using Bluetooth due to 802.11b/g/n and Bluetooth both utilizing 2.4
GHz, but also due to the above limitations.
Security
When deploying a wireless LAN, security is essential.
The Cisco IP Phone 8800 Series supports the following wireless security features.
To Next Page
Loading...
Need help?
General
