Cisco 8800 Series Deployment Guide

Cisco IP Phone 8800 Series Wireless LAN Deployment Guide
81
Dot11 phone will enable the 2 Cisco versions, where dot11 phone dot11e will enable both CCA versions (802.11e and Cisco
version 2). It is recommended to enable dot11 phone dot11e.
CCKM Timestamp Tolerance
The default CCKM timestamp tolerance is set to 1000 ms.
It is recommended to adjust the CCKM timestamp tolerance to 5000 ms to optimize the Cisco IP Phone 8800 Series roaming
experience.
(Cisco Controller) >config wlan security wpa akm cckm timestamp-tolerance ?
<tolerance> Allow CCKM IE time-stamp tolerance <1000 to 5000> milliseconds; Default tolerance 1000 msecs
Use the following command to configure the CCKM timestamp tolerance per Cisco recommendations.
(Cisco Controller) >config wlan security wpa akm cckm timestamp-tolerance 5000 <WLAN id >
To confirm the change, enter show wlan <WLAN id>, where the following will be displayed.
CCKM tsf Tolerance............................... 5000

Cisco 8800 Series Specifications

General

Protocols	SIP, SCCP
Audio	Wideband audio
Connectivity	Gigabit Ethernet
Power	Power over Ethernet (PoE)
Bluetooth	Yes
USB	Yes
Codec Support	G.711, G.722, G.729, iLBC
Dimensions	Varies by model
Weight	Varies by model
Wi-Fi	Yes (varies by model)