G.722 and iSAC Advertisement
Cisco Unified Communications Manager supports the ability to configure whether G.722 and iSAC are to be a supported codec
system wide or not.
G.722 and iSAC codecs can be disabled at the enterprise phone, common phone profile or individual phone level by setting
Advertise G.722 and iSAC Codecs to Disabled.
For more information, refer to the Cisco Unified Communications Manager documentation.
http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/tsd-products-
support-series-home.html
Common Settings
Some settings such as Wireless LAN and Bluetooth can be configured on an enterprise phone, common phone profile or
individual phone level.
Wireless LAN and Bluetooth are enabled by default for the Cisco IP Phone 8861.
Wireless LAN is automatically disabled temporarily when Ethernet is connected to the Cisco IP Phone 8861, but will be
automatically re-enabled once Ethernet is disconnected if Wireless LAN was enabled previously.
Override common settings can be enabled at either configuration level.
To Next Page
Loading...
Need help?
General
