Cisco 8800 Series Deployment Guide

Cisco IP Phone 8800 Series Wireless LAN Deployment Guide
8
Call Control
The Cisco IP Phone 8800 Series utilizes Session Initiation Protocol (SIP) for call control with the following applications.
• Cisco Unified Communications Manager (CUCM)
Minimum = 8.5(1)
Recommended = 8.6(2), 9.1(2), 10.0 and later
Device Support in Cisco Unified Communications Manager
Cisco Unified Communications Manager requires a device package to be installed or service release update in order to enable
Cisco IP Phone 8800 Series device support.
Device packages for Cisco Unified Communications Manager are available at the following location.
http://software.cisco.com/download/navigator.html?mdfid=278875240
Protocols
Supported voice and wireless LAN protocols include the following:
• Wi-Fi MultiMedia (WMM)
• Traffic Specification (TSPEC)
• Traffic Classification (TCLAS)
• Session Initiation Protocol (SIP)
• Real Time Protocol (RTP)
• G.722, G.711, iSAC, iLBC, G.729
• Cisco Discovery Protocol (CDP)
Access Points
The Cisco IP Phone 8800 Series is supported on the following Cisco Wireless LAN solutions.
• Cisco Unified Wireless LAN Controller
Minimum = 7.0.250.0
Recommended = 7.4.121.0, 7.6.120.0
• Cisco IOS Access Points (Autonomous)
Minimum = 12.4(21a)JY
Recommended = 12.4(25d)JA2, 15.2(4)JA1
Below are the Cisco Unified and Autonomous Access Points that are supported.

Cisco 8800 Series Specifications

General

Protocols	SIP, SCCP
Audio	Wideband audio
Connectivity	Gigabit Ethernet
Power	Power over Ethernet (PoE)
Bluetooth	Yes
USB	Yes
Codec Support	G.711, G.722, G.729, iLBC
Dimensions	Varies by model
Weight	Varies by model
Wi-Fi	Yes (varies by model)