Cisco 8800 Series Deployment Guide

Cisco IP Phone 8800 Series Wireless LAN Deployment Guide
54
The WMM policy should be set to Required only if the Cisco IP Phone 8800 Series or other WMM enabled phones will be
using this SSID.
If there are non-WMM clients existing in the WLAN, it is recommended to put those clients on another WLAN.
If non-other WMM clients must utilize the same SSID as the Cisco IP Phone 8800 Series, then ensure the WMM policy is set to
Allowed.
Enable 7920 AP CAC to advertise Qos Basic Service Set (QBSS) to the client.

Cisco 8800 Series Specifications

General

Protocols	SIP, SCCP
Audio	Wideband audio
Connectivity	Gigabit Ethernet
Power	Power over Ethernet (PoE)
Bluetooth	Yes
USB	Yes
Codec Support	G.711, G.722, G.729, iLBC
Dimensions	Varies by model
Weight	Varies by model
Wi-Fi	Yes (varies by model)