Cisco 9971 - Phone with Single Line

Flinders
Connecting
CRICOS No. 00114A
17
Phone display
Can be positioned to your preferred viewing angle.
18
Programmable feature
buttons
(also called feature
buttons)
Correspond to phone lines, speed dials, and calling features.
Press a button for a phone line to display the active calls for
that line.
If you have multiple lines, you may have an All Calls button
that displays a consolidated list of all calls from all lines (oldest
at the top). If you do not see the All Calls button, your system
administrator may have set up the primary line to automatically
display all calls.
For information on your set up, contact your system
administrator.
Colour LEDs indicate the line state:
•
Amber : Ringing call on this line
•
Green : Active or held call on this line
•
Red : Shared line in-use remotely
The positions of the session buttons and feature buttons can
be reversed on phones that use a locale with a right-to-left
reading orientation, such as Hebrew and Arabic.
19
Handset with light strip
The handset light strip lights up to indicate a ringing call
(flashing red) or a new voice message (steady red).
Phone Screen
The way that your system administrator set up your phone determines what is
displayed on your phone screen.
Phone with Single Line