Cisco 9971 - Phone with Multiple Lines

Flinders
Connecting
CRICOS No. 00114A
1
Header
Displays the date, time, and information (such as phone
number) about the selected line.
2
Primary line label
Displays the primary line phone information.
3
Session label
Displays information (such as call status and duration) about
active calls associated with the selected line. Calls are
displayed in order of the oldest (at the top) to the newest.
The timer counts the call duration in minutes and seconds
(MM:SS) until the call exceeds 60 minutes. Then the timer
counts hours and minutes (HH:MM).
4
New Call icon
A touch-sensitive icon you can press to make a new call.
5
Softkeys
Touch-sensitive softkey options for the selected (highlighted)
call only.
If you select a different call (for example, you press a feature
button, press the Navigation pad, or answer a ringing call), the
softkey options may change.
Phone with Multiple Lines
If you have multiple lines, you can use All Calls to view all calls on all lines. Your
system administrator can also set up your primary line key to automatically display all
calls on all lines.
If you handle many calls at one time, use Answer to answer the oldest incoming call
without having to scroll down the call list and select the call.
For more information, contact your system administrator.