Cisco Aironet 1100 Series

Contents
x
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
OL-2851-01
CHAPTER 17 Configuring SNMP 17-1
Understanding SNMP 17-2
SNMP Versions 17-2
SNMP Manager Functions 17-3
SNMP Agent Functions 17-3
SNMP Community Strings 17-3
Using SNMP to Access MIB Variables 17-4
Configuring SNMP 17-4
Default SNMP Configuration 17-5
Disabling the SNMP Agent 17-5
Configuring Community Strings 17-5
Configuring Trap Managers and Enabling Traps 17-7
Setting the Agent Contact and Location Information 17-9
Using the snmp-server view Command 17-9
SNMP Examples 17-9
Displaying SNMP Status 17-10
CHAPTER 18 Configuring Repeater and Standby Access Points 18-1
Understanding Repeater Access Points 18-2
Configuring a Repeater Access Point 18-3
Default Configuration 18-4
Guidelines for Repeaters 18-4
Setting Up a Repeater 18-4
Verifying Repeater Operation 18-5
Setting Up a Repeater as a LEAP Client 18-6
Understanding Hot Standby 18-7
Configuring a Hot Standby Access Point 18-7
CHAPTER 19 Managing Firmware and Configurations 19-1
Working with the Flash File System 19-2
Displaying Available File Systems 19-2
Setting the Default File System 19-3
Displaying Information about Files on a File System 19-3
Changing Directories and Displaying the Working Directory 19-4
Creating and Removing Directories 19-4
Copying Files 19-5
Deleting Files 19-5
Creating, Displaying, and Extracting tar Files 19-6