Cisco Aironet 1100 Series - CHAPTER 7 Configuring Radio Settings

CHAPTER
7-1
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
OL-2851-01
7
Configuring Radio Settings
This chapter describes how to configure radio settings for your access point. This chapter includes these
sections:
• Disabling and Enabling the Radio Interface, page 7-2
• Configuring the Role in Radio Network, page 7-2
• Configuring Radio Data Rates, page 7-3
• Configuring Radio Transmit Power, page 7-5
• Configuring Radio Channel Settings, page 7-6
• Enabling and Disabling World-Mode, page 7-7
• Disabling and Enabling Short Radio Preambles, page 7-7
• Configuring Transmit and Receive Antennas, page 7-8
• Disabling and Enabling Aironet Extensions, page 7-9
• Configuring the Ethernet Encapsulation Transformation Method, page 7-10
• Enabling and Disabling Reliable Multicast to Workgroup Bridges, page 7-10
• Enabling and Disabling Public Secure Packet Forwarding, page 7-11
• Configuring the Beacon Period and the DTIM, page 7-12
• Configure RTS Threshold and Retries, page 7-12
• Configuring the Maximum Data Retries, page 7-13
• Configuring the Fragmentation Threshold, page 7-13