Cisco Aironet 1100 Series - Appendix; Access Point Specifications

G-1
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
OL-2851-01
APPENDIX G
Access Point Specifications
This appendix provides technical specifications for the Cisco Aironet 1100 Series Access Point.
Table G-1 lists the technical specifications for the access point.
Table G-1 Access Point Specifications
Category Specification
Physical
Size 4.1 in. W x 1.5 in. D x 8.1 in. H
10.4 cm W x 3.8 cm D x 20.6 cm H
Status Indicators Three indicators on the top panel:
Ethernet traffic
Status
Radio traffic
Connectors End panel (left to right): RJ-45 connector for 10/100 BASE-T Ethernet
connections; power connector (for plug-in AC power module).
Input Voltage 48 VDC nominal. Operational up to 60 VDC. Voltage higher than 60 VDC
can damage the unit.
Input Current 150 mA
Operating
Temperature
32 to 104
o
F (0 to 40
o
C) for the access point
32 to 104
o
F (0 to 40
o
C) for the power injector
Storage
Temperature
–40 to 185
o
F (–40 to 85
o
C) for access point
Weight 10.5 oz (297g) with 2.4-GHz radio