Cisco Aironet 1100 Series

Contents
xii
Cisco Aironet 1100 Series Access Point Installation and Configuration Guide
OL-2851-01
CHAPTER 20 Configuring System Message Logging 20-1
Understanding System Message Logging 20-2
Configuring System Message Logging 20-2
System Log Message Format 20-2
Default System Message Logging Configuration 20-3
Disabling and Enabling Message Logging 20-4
Setting the Message Display Destination Device 20-5
Enabling and Disabling Timestamps on Log Messages 20-6
Enabling and Disabling Sequence Numbers in Log Messages 20-6
Defining the Message Severity Level 20-7
Limiting Syslog Messages Sent to the History Table and to SNMP 20-8
Setting a Logging Rate Limit 20-9
Configuring UNIX Syslog Servers 20-9
Logging Messages to a UNIX Syslog Daemon 20-10
Configuring the UNIX System Logging Facility 20-10
Displaying the Logging Configuration 20-11
CHAPTER 21 Troubleshooting 21-1
Checking the Top Panel Indicators 21-2
Checking Basic Settings 21-4
SSID 21-4
WEP Keys 21-4
Security Settings 21-5
Resetting to the Default Configuration 21-5
Using the MODE Button 21-5
Using the Web Browser Interface 21-6
Reloading the Access Point Image 21-6
Using the MODE button 21-6
Web Browser Interface 21-7
Browser HTTP Interface 21-7
Browser TFTP Interface 21-8
Obtaining the Access Point Image File 21-8
Obtaining the TFTP Server Software 21-8
Activating and Configuring the TFTP Server 21-9