Cisco ASR 900 Series Configuration Guide

Verifying ACR in Mode T3 for SAToP 139
Configuring ACR in Mode CT3 for SAToP 139
Verifying ACR in Mode CT3 for SAToP 140
Differential Clock Recovery (DCR) 140
Explicit Pointer Adjustment Relay (EPAR) 141
Restrictions for EPAR 141
Benefits of Clock Recovery 142
Configuring DCR for OCn 142
Configuring DCR in Mode VT15 for SAToP 142
Verifying DCR in Mode VT15 for SAToP 142
Configuring DCR in Mode CT3 for SAToP 143
Verifying DCR in Mode CT3 for SAToP 143
Configuring DCR in Mode T3 for SAToP 144
Verifying DCR in Mode T3 for SAToP 144
Configuring ACR in Mode CT3 for CESoPSN 145
Verification of EPAR Configuration 145
Recovering a Clock 146
Example: Adaptive Clock Recovery (ACR) for SAToP 146
Example: Differential Clock Recovery (DCR) for SAToP 147
Additional References for Clock Recovery 147
CHAPTER 9 Configuring 5G Mode on 1-Port OC-192/STM-64 or 8-Port OC-3/12/48/STM-1/-4/-16 Interface
Module 149
Supported Traffic Combinations 152
Restrictions for Configuring 1-Port OC-192/STM-64 or 8-Port OC-3/12/48/STM-1/-4/-16
Interface Module 152
Important Notes on Configuration 152
Configuring 5G Mode from 10G Mode 153
Configuring 10G Mode from 5G Mode 153
Verification of 5G Traffic Configuration 153
Associated Commands 153
CHAPTER 10 Configuring Data Communication Channel 155
Restrictions of DCC 156
Configuring PPP 157
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x
(Cisco ASR 900 Series)
xii
Contents

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English