Cisco ASR 900 Series Configuration Guide

Verifying DCR Configuration for CESoPSN
Use the show recovered clock command to verify DCR configuration:
Router# show recovered clock
Recovered clock status for SSDH-DCR 200
----------------------------------------
Clock Type Mode CEM Status Circuit-No Working Protect
Priority
5 OCx-T1 DIFFERENTIAL 44 ACQUIRING 200/4/1/1(acr/path/vtg/t1) ACQUIRIN ACQUIRING
1
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x (Cisco
ASR 900 Series)
111
Configuring SDH on 1-Port OC-192/STM-64 or 8-Port OC-3/12/48/STM-1/-4/-16 Module
Configuring DCR for CESoPSN

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English