Cisco ASR 900 Series - Line Alarms; Path Alarms; VT Alarms

Line Alarms
The following line alarms are supported:
• AIS-L — Line AIS
• REI-L — Line Remote Error Indication
• RDI-L — Line Remote Defect Indication
• B2 — Line BIP Error (SF/SD)
•
TCA for B2
Path Alarms
The following path alarms are supported:
• AIS-P — STS Path AIS
• LOP-P — STS Path Loss of Pointer
• B3 (SF/SD) — STS Path BIP Error
• UNEQ-P — STS Path unequipped
• REI-P — STS Path Remote Error
• RDI-P — STS Path Remote Defect Indication
• PLM-P — STS path Payload Label Mismatch
• LOM — Loss of MultiFrame
•
TCA for B3
VT Alarms
The following VT alarms are supported:
• AIS-V — VT Path AIS
• LOP-V — VT Loss of Pointer
• V-BIP (SF/SD) — VT Path BIP error
• UNEQ-V — VT Path Unequipped
• REI-V — VT Path Remote Error
• RDI-V — VT Path Remote Defect Indication
• PLM-V — VT path Payload Label Mismatch
•
TCA for VT Level BIP
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x
(Cisco ASR 900 Series)
34
Configuring SONET
SONET Alarm Surveillance