Cisco ASR 900 Series - Services Provided by SDH Configuration

Services Provided by SDH Configuration
The following services are provided by SDH Configuration:
Configuration DetailsSDH Circuits
•
Configuring Mediatype Controller
•
Configuring Rate on SDH Ports
•
Configurin AU-3 or AU-4 Mapping
•
Configuring Modes under AU-4 Mapping
•
Configuring Mode VC4 CEP
Configuring VC4 CEP circuit
•
Configuring Mediatype Controller
•
Configuring Rate on SDH Ports
•
Configuring AU-3 or AU-4 Mapping
•
Configuring Modes under AU-4 Mapping
•
Configuring Mode VC-4 Nc
Configuring VC4-4c circuit or Configuring VC4-16c
circuit
•
Configuring Mediatype Controller
•
Configuring Rate on SDH Ports
•
Configuring AU-3 or AU-4 Mapping
•
Configuring Mode TUG-3
Configuring VC4—TUG3—E3 circuit
•
Configuring Mediatype Controller
•
Configuring Rate on SDH Ports
•
Configuring AU-3 or AU-4 Mapping
•
Configuring Mode TUG-3
•
Configuring AU-4—TUG-3—VC-3—DS3
Configuring VC4—TUG3—T3 circuit
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x (Cisco
ASR 900 Series)
73
Configuring SDH on 1-Port OC-192/STM-64 or 8-Port OC-3/12/48/STM-1/-4/-16 Module
Services Provided by SDH Configuration