Cisco ASR 900 Series - Page 88

Configuration DetailsSDH Circuits
•
Configuring Mediatype Controller
•
Configuring Rate on SDH Ports
•
Configuring AU-3 or AU-4 Mapping
•
Configuring Mode TUG-3
•
Configuring
VC4—TUG-3—TUG-2—VC-12—VC
Configuring VC4—TUG-3—TUG-2—VC-12 circuit
•
Configuring Mediatype Controller
•
Configuring Rate on SDH Ports
•
Configuring AU-3 or AU-4 Mapping
•
Configuring Mode TUG-3
•
Configuring AU-4—TUG-3—TUG-2—VC-12
Configuring VC4 — TUG-3 — TUG-2 — VC-12 —
E1 circuit
•
Configuring Mediatype Controller
•
Configuring Rate on SDH Ports
•
Configuring AU-3 or AU-4 Mapping
•
Configuring Mode TUG-3
•
Configuring
AU-4—VC4—TUG-3—TUG-2—VC-11—T1
Configuring VC4— TUG-3—TUG-2—VC-11 circuit
•
Configuring Mediatype Controller
•
Configuring Rate on SDH Ports
•
Configuring AU-3 or AU-4 Mapping
•
Configuring AU-3—VC-3—E3
Configuring AU-3—VC-3—E3 circuit
•
Configuring Mediatype Controller
•
Configuring Rate on SDH Ports
•
Configuring AU-3 or AU-4 Mapping
•
Configuring AU-3—VC-3—DS3 circuit
Configuring AU-3—VC-3—DS3 circuit
1-Port OC-192 or 8-Port Low Rate CEM Interface Module Configuration Guide, Cisco IOS XE Everest 16.7.x
(Cisco ASR 900 Series)
74
Configuring SDH on 1-Port OC-192/STM-64 or 8-Port OC-3/12/48/STM-1/-4/-16 Module
Services Provided by SDH Configuration