Cisco ASR1002 - ASR 1002 Router Software Configuration Guide

Contents
xii
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-11
Layer 2 to Layer 3 4
Layer 3 to Layer 2 4
Link States of a Bridge Domain and a Bridge Domain Interface 5
BDI Initial State 5
BDI Link State 5
Bridge Domain Interface Statistics 5
Creating or Deleting a Bridge Domain Interface 6
Bridge Domain Interface Scalability 6
How to Configure a Bridge Domain Interface 6
Example 8
Additional References 10
Related Documents 10
Standards 10
MIBs 10
RFCs 10
Technical Assistance 10
Feature Information for Configuring Bridge Domain Interfaces 11
Monitoring and Maintaining Multilink Frame Relay 1
Finding Feature Information in This Module 1
Contents 1
Feature Overview 2
Configuring Multilink Frame Relay 2
Monitoring and Maintaining Frame Relay and Multilink Frame Relay 2
Additional References 3
Related Documents 3
Standards 3
MIBs 3
RFCs 3
Technical Assistance 3
Feature Information for Monitoring and Maintaining Multilink Frame Relay 4
Configuring MPLS Layer 2 VPNs 1
Finding Feature Information 1
Contents 1
Overview of L2VPN Interworking 2
L2VPN Interworking Modes 2
Ethernet or Bridged Interworking 2
IP or Routed Interworking 3

Cisco ASR1002 - ASR 1002 Router Specifications

General

Form Factor	Rack-mountable
Maximum Throughput	10 Gbps
Operating System	Cisco IOS XE
Product Type	Router
Product Series	ASR 1000
Model	ASR1002
Encryption Throughput	Up to 2.5 Gbps
Memory	4 GB DRAM
Power Supply	AC or DC
Interfaces	4 x SFP
Redundancy	Power supply (optional)
Input Voltage	100-240 VAC
Modular Slots	2 x SPA slots
Rack Unit Height	2U