Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Configuring Cisco Right-To-Use License
First Published: July 2012
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. To find information
about the features documented in this module, and to see a list of the releases in which each feature is
supported, see the Feature Information for Cisco Right-To-Use License, page 13.
Use Cisco Feature Navigator to find information about platform support and Cisco software image
support. T
o access Cisco Feature Navigator, go to http://www.cisco.com/go/cfn. An ac
count on
Cisco.com is not required.
Contents
• Prerequisites for Cisco Right-To-Use License, page 1
• Restrictions for Cisco Right-To-Use License, page 2
• Information About Cisco Right-To-Use License, page 2
• Configuration Examples for Right-To-Use Supported Software Licenses, page 5
• Additional References, page 11
• Feature Information for Cisco Right-To-Use License, page 13
Prerequisites for Cisco Right-To-Use License
• You must obtain the device certificate from the Cisco licensing infrastructure before starting.
• You must have a CCO user login account.
To Next Page
Loading...
