Cisco ASR1002 - ASR 1002 Router - Viewing Console Port, SSH, and Telnet Handling Configurations

Console Port, Telnet, and SSH Handling
Viewing Console Port, SSH, and Telnet Handling Configurations
11
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Router(config-tmap)# rsa keypair-name sshkeys
Router(config-tmap)# authentication-retries 1
Router(config-tmap)# banner diagnostic X
Enter TEXT message. End with the character 'X'.
--Welcome to Diagnostic Mode--
X
Router(config-tmap)#banner wait X
Enter TEXT message. End with the character 'X'.
--Waiting for vty line--
X
Router(config-tmap)# time-out 30
Router(config-tmap)# transport interface gigabitethernet 0
Router(config-tmap)# exit
Router(config)# transport type persistent ssh input sshhandler
Viewing Console Port, SSH, and Telnet Handling Configurations
Use the show transport-map [all | name transport-map-name | type [console | persistent [ssh |
telnet]]] EXEC or privileged EXEC command to view the transport map configurations.
In the following example, a console port, persistent SSH, and persistent Telnet transport are configured
o
n the router and various forms of the show transport-map command are entered to illustrate the
various ways the show transport-map command can be entered to gather transport map configuration
information.
Router# show transport-map all
Transport Map:
Name: consolehandler
Type: Console Transport
Connection:
Wait option: Wait Allow Interruptable
Wait banner:
Waiting for the IOS CLI
bshell banner:
Welcome to Diagnostic Mode
Transport Map:
Name: sshhandler
Type: Persistent SSH Transport
Interface:
GigabitEthernet0
Connection:
Wait option: Wait Allow Interruptable
Wait banner:
Waiting for IOS prompt
Bshell banner:
Welcome to Diagnostic Mode
SSH: