Cisco ASR1002 - ASR 1002 Router Software Configuration Guide

Software Upgrade Process
Upgrade Process With Service Impact for Nonredundant Platforms
94
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
New files list:
Added asr1001-espbase.03.02.01.S.151-1.S1_2.pkg
Added asr1001-rpbase.03.02.01.S.151-1.S1_2.pkg
Added asr1001-sipbase.03.02.01.S.151-1.S1_2.pkg
Added asr1001-sipspa.03.02.01.S.151-1.S1_2.pkg
Finished list of software package changes
--- Starting commit of software changes ---
Updating provisioning rollback files
Creating pending provisioning file
Committing provisioning file
Finished commit of software changes
SUCCESS: Software provisioned. New software will load on reboot.
Router# r
eload
Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (software
upgrade Command Set)
This section provides instructions on using software upgrade for Cisco ASR 1002 or 1004 Router
running subpackages.
These instructions assume two IOS processes are active on
the RP and that the router is already running
using subpackages. For information on checking and configuring two IOS processes on the same RP, see
the “Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router
(software upgrade Command Set)” section on page 94.
SUMMARY STEPS
1. show version
show version insta
lled
dir f
ilesystem:<directory>
show platform
show redundancy-states
2. redundancy
mode sso
3. mkdir URL-to-directory-name
4. ip tftp source-interface gigabitethernet slot/port
5. copy tftp: URL-to-target-location
6. request platform software package expand file URL-to-consolidated-package
7. dir URL-to-consolidated-package
8. copy file-system:asr1000rp1-espbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpaccess.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpbase.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpcontrol.version.pkg URL-to-directory-of-sub-packages-active-RP
copy fi
le-system:asr1000rp1-rpios.version.pkg URL-to-directory-of-sub-packages-active-RP

Cisco ASR1002 - ASR 1002 Router Specifications

General

Form Factor	Rack-mountable
Maximum Throughput	10 Gbps
Operating System	Cisco IOS XE
Product Type	Router
Product Series	ASR 1000
Model	ASR1002
Encryption Throughput	Up to 2.5 Gbps
Memory	4 GB DRAM
Power Supply	AC or DC
Interfaces	4 x SFP
Redundancy	Power supply (optional)
Input Voltage	100-240 VAC
Modular Slots	2 x SPA slots
Rack Unit Height	2U