Cisco ASR1002 - ASR 1002 Router Software Configuration Guide

Software Upgrade Process
Upgrade Process With Service Impact for Nonredundant Platforms
100
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Examples
The following example shows the software upgrade for Cisco ASR 1002 or 1004 Router running
sub-packages:
Router# show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version
12.2(33)X
NA, RELEASE SOFTWARE (fc1)
<output removed for brevity>
System image file is "bootflash:packages.conf"
<output removed for brevity>
cisco ASR1004 (RP1) processor with 752142K/6147K bytes of memory.
5 Gigabit Ethernet interfaces
2 Serial interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
937983K bytes of eUSB flash at bootflash:.
39004543K bytes of SATA hard disk at bootflash:.
253424K bytes of USB flash at usb0:.
Step 16
issu loadversion rp 0 file
file-system:asr1000rp1-esp*version*.pkg force
Example:
Router# issu loadversion rp 0 file
bootflash:asr1000rp1-esp*02.02.01.122-33.XNB1*.
pkg force
Upgrade the ESP Base subpackage.
Step 17
issu commitversion
Example:
Router# issu commitversion
Commit the ESP Base software.
Step 18
issu loadversion rp 0 file
file-system:asr1000rp*version*.pkg
Example:
Router# issu loadversion rp 0 file
bootflash:asr1000rp*02.02.01.122-33.XNB1*.pkg
Upgrades all subpackages, including the RPBase
subpackage, which is the last subpackage that needs to be
upgraded.
Note This step is required to ensure that all subpackages
on the router were upgraded as part of this
procedure, and might upgrade some subpackages
that would otherwise be missed in the process.
Step 19
show version installed
Example:
Router# show version installed
(Optional) Verify that the subpackages are properly
installed.
Step 20
reload
Example:
Router# reload
Reload the RP.
Tip The router will continue normal operation even
without a reload, so you can reload the router during
scheduled maintenance or a slower traffic period.
Step 21
request platform software package clean
(Optional) Removes the unused subpackages from the
router.
Command or Action Purpose

Cisco ASR1002 - ASR 1002 Router Specifications

General

Form Factor	Rack-mountable
Maximum Throughput	10 Gbps
Operating System	Cisco IOS XE
Product Type	Router
Product Series	ASR 1000
Model	ASR1002
Encryption Throughput	Up to 2.5 Gbps
Memory	4 GB DRAM
Power Supply	AC or DC
Interfaces	4 x SFP
Redundancy	Power supply (optional)
Input Voltage	100-240 VAC
Modular Slots	2 x SPA slots
Rack Unit Height	2U