Software Upgrade Process
Upgrade Process With Service Impact for Nonredundant Platforms
108
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
--- Starting commit of software changes ---
Updating provisioning rollback files
Creating pending provisioning file
Committing provisioning file
Finished commit of software changes
--- Starting analysis of software changes ---
Finished analysis of software changes
--- Starting update running software ---
Blocking peer synchronization of operating information
Creating the command set placeholder directory
Finding latest command set
Finding latest command shortlist lookup file
Finding latest command shortlist file
Assembling CLI output libraries
Assembling CLI input libraries
Applying interim IPC and database definitions
Replacing running software
Replacing CLI software
Restarting software
*Sep 25 18:13:27.604: %IOSXE-4-PLATFORM: R0/0: kernel: scooby: Scooby: FD close
Restartin
g IOS PID: 20492, in slot/bay 0/0
*Sep 25 18:13:53.696: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault
(PEER_NOT
_PRESENT)
*Sep 25 18:13:53.696: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_DOWN)
*Sep 25 18:13:53.697: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault
(PEER_RED
UNDANCY_STATE_CHANGE)FIXME: kill/restart security package: 0 0 rp_security
1 0 rp_security
Applying final IPC and database definitions
*Sep 25 18:13:56.593: %DYNCMD-7-CMDSET_UNLOADED: The Dynamic Command set from the Shell
Manager h
as been unloaded
*Sep 25 18:13:56.963: %DYNCMD-7-CMDSET_LOADED: The Dynamic Command set has been loaded
from the
Shell Manager
*Sep 25 18:13:59.457: %RF-5-RF_RELOAD: Peer reload. Reason: EHSA standby down Generating
software version
information
Notifying running software of updates
Unblocking peer synchronization of operating information
Unmounting old packages
Cleaning temporary installation files
Finished update running software
SUCCESS: Finished installing software.
Router#
Router#
Router# i
ssu commitversion
--- Starting installation changes ---
Cancelling rollback timer
Finished installation changes
SUCCESS: Installation changes committed
*Sep 25 18:14:47.232: %CMRP-5-PRERELEASE_HARDWARE: R0/0: cmand: 0:0 is pre-release
hardware
*Sep 25 18:14:47.299: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby
insertion
(raw-event=PEER_FOUND(4))
*Sep 25 18:14:47.299: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby
insertion
(raw-event=PEER_REDUNDANCY_STATE_CHANGE(5))
To Next Page
Loading...
Need help?
General
