Configuring Call Home
Displaying Call Home Configuration Information
36
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Mail-server[2]: Address: 192.168.0.1 Priority: 2
Rate-limit: 20 message(s) per minute
Available alert groups:
Keyword State Description
------------------------ ------- -------------------------------
configuration Enable configuration info
diagnostic Enable diagnostic info
environment Enable environmental info
inventory Enable inventory info
syslog Enable syslog info
Profiles:
Profile Name: campus-noc
Profile Name: CiscoTAC-1
Example: Configured Call Home Information in Detail
Router# show call-home detail
Current call home settings:
call home feature : disable
call home message's from address: username@example.com
call home message's reply-to address: username@example.com
vrf for call-home messages: Mgmt-intf
contact person's email address: username@example.com
contact person's phone number: +14085551234
street address: 1234 Any Street Any city Any state 12345
customer ID: customer@example.com
contract ID: 123456789
site ID: example.com
Mail-server[1]: Address: smtp.example.com Priority: 1
Mail-server[2]: Address: 192.168.0.1 Priority: 2
Rate-limit: 20 message(s) per minute
Available alert groups:
Keyword State Description
------------------------ ------- -------------------------------
configuration Enable configuration info
diagnostic Enable diagnostic info
environment Enable environmental info
inventory Enable inventory info
syslog Enable syslog info
Profiles:
Profile Name: campus-noc
Profile status: ACTIVE
Preferred Message Format: long-text
Message Size Limit: 3145728 Bytes
Transport Method: email
Email address(es): username@example.com
HTTP address(es): Not yet set up
Alert-group Severity
------------------------ ------------
inventory normal
Syslog-Pattern Severity
------------------------ ------------
N/A N/A
To Next Page
Loading...
Need help?
General
