Cisco ASR1002 - ASR 1002 Router

To Next Page

To Previous Page

B-27

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

OL-16506-11

Appendix B Configuration Examples

ISSU—Consolidated Package Upgrade

4194304K bytes of physical memory.

921599K bytes of eUSB flash at bootflash:.

39004543K bytes of SATA hard disk at harddisk:.

Configuration register is 0x2102

Router# s

how running-config | include boot

boot-start-marker

boot system bootflash:asr1000rp1-adventerprisek9.02.01.01.122-33.XNA1.bin

boot system bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin

boot-end-marker

Router#

Main Page

Default Chapter3
- Table of Contents3
Software Packaging and Architecture16
- Related Documentation19
- Obtaining Documentation and Submitting a Service Request20
- Software Packaging on the Cisco ASR 1000 Series Routers21
- Processes Overview26
Using Cisco IOS XE Software31
- Accessing the CLI Using a Router Console31
- Using the Auxiliary Port34
- Using Keyboard Shortcuts35
- Using the History Buffer to Recall Commands35
- Understanding the Command Mode36
- Understanding the Diagnostic Mode37
- Getting Help38
  - Finding Command Options38
- Using the no and Default Forms of Commands41
- Saving Configuration Changes42
- Managing Configuration Files42
- Filtering the Output of the Show and more Commands43
- Powering off a Router44
- Finding Support Information for Platforms and Cisco Software Images44
Console Port, Telnet, and SSH Handling47
- Console Port Overview for the Cisco ASR 1000 Series Routers47
- Console Port Handling Overview47
- Telnet and SSH Overview for the Cisco ASR 1000 Series Routers48
- Persistent Telnet and Persistent SSH Overview48
- Configuring a Console Port Transport Map49
  - Examples49
  - Examples50
- Configuring Persistent Telnet51
- Configuring Persistent SSH54
  - Examples54
  - Examples56
- Viewing Console Port, SSH, and Telnet Handling Configurations57
- Important Notes and Restrictions62
Consolidated Packages and Subpackages Management64
- Running the Cisco ASR 1000 Series Routers: an Overview64
- Software File Management Using Command Sets66
- Managing and Configuring the Router to Run Using Consolidated Packages and Individual Subpackages68
- Upgrading Individual Subpackages80
  - Upgrading a SPA Subpackage81
Software Upgrade Process83
- Contents84
- Prerequisites for Software Upgrade Process84
- ISSU Upgrade for Redundant Platforms84
- Upgrade Process with Service Impact for Nonredundant Platforms158
  - Configuring SSO on a Cisco ASR 1001, Cisco ASR 1002, or Cisco ASR 1004 Router158
  - Using Subpackages for Software Upgrade on a Cisco ASR 1001 Router158
- Feature Information for Software Upgrade Process225
High Availability Overview227
- Contents227
- Finding Feature Information in this Module227
- Hardware Redundancy Overview on the Cisco ASR 1000 Series Routers227
- Software Redundancy on the Cisco ASR 1000 Series Routers228
- Route Processor Redundancy231
- Stateful Switchover231
- Bidirectional Forwarding Detection232
- Ipsec Failover232
- Feature Information for High Availability Overview234
Broadband Scalability and Performance235
- Contents235
- Finding Feature Information in this Module235
- PPP Sessions and L2TP Tunnel Scaling235
  - Restrictions for PPP Sessions and L2TP Tunnel Scaling236
- IP Sessions Scaling237
- Configuring ASR 1000 for High Scalability238
- Configuring the Cisco ASR 1000 Series Router for High Scalability238
- Layer 4 Redirect Scaling238
- Using the Cisco-Avpair="Lcp:interface-Config" RADIUS Attribute241
- Walk-By User Support for PWLAN in ISG243
  - Restrictions for Walk-By Session Support for PWLAN in ISG243
  - ISG Scaling to Support Lite Sessions244
- Feature Information for Broadband Scalability and Performance246
Configuring Cisco License Call Home247
- Contents247
- Finding Feature Information in this Module247
- Prerequisites for Cisco License Call Home247
- Restrictions for Cisco License Call Home247
  - Cisco License Call Home Interface248
- How to Configure Cisco License Call Home249
- Feature Information for Cisco License Call Home256
Configuring Call Home257
- Contents257
- Information about Call Home257
- How to Configure Call Home259
- How to Configure Call Home to Support the Smart Call Home Service283
- Displaying Call Home Configuration Information290
- Examples290
- Default Settings295
- Alert Group Trigger Events and Commands296
- Message Contents298
- Feature Information for Call Home315
Configuring Cisco Right-To-Use License317
- Finding Feature Information317
  - Contents317
  - Prerequisites for Cisco Right-To-Use License317
- Restrictions for Cisco Right-To-Use License317
- Overview318
- Configuration Examples for Right-To-Use Supported Software Licenses321
- Feature Information for Cisco Right-To-Use License329
Contents331
- Gigabit Ethernet Management Interface Overview331
- Gigabit Ethernet Port Numbering331
- Gigabit Ethernet Management Interface Overview332
- Gigabit Ethernet Port Numbering332
  - Viewing the VRF Configuration333
- Common Ethernet Management Tasks333
- Additional References338
Using the Management Ethernet Interface331
- Finding Feature Information in this Module331
Network Synchronization Support341
- Finding Feature Information in this Module341
- Contents341
- Network Synchronization Overview341
- Synchronization Status Message and Ethernet Synchronization Messaging Channel341
  - Network Synchronization Overview342
  - Clock Selection Algorithm345
- Restrictions and Usage Guidelines346
- Configuring Network Synchronization346
- Additional References358
- Feature Information for Network Synchronization Support359
Configuring Bridge Domain Interfaces361
- Finding Feature Information361
  - Contents361
- Restrictions for Bridge Domain Interfaces361
- Information about Bridge Domain Interfaces361
- Creating or Deleting a Bridge Domain Interface366
- Bridge Domain Interface Scalability366
- How to Configure a Bridge Domain Interface366
- Feature Information for Configuring Bridge Domain Interfaces371
Monitoring and Maintaining Multilink Frame Relay373
- Configuring Multilink Frame Relay373
- Contents373
- Feature Overview373
- Finding Feature Information in this Module373
- Configuring Multilink Frame Relay374
- Feature Information for Monitoring and Maintaining Multilink Frame Relay376
Configuring MPLS Layer 2 Vpns377
- Contents377
- Finding Feature Information377
- Overview of L2VPN Interworking377
- L2VPN Interworking Modes378
- Configuring Frame Relay DLCI-To-ATM AAL5SNAP Bridged Interworking382
  - Example: Frame Relay-To-ATM Bridged Interworking on an ATM-PE Router386
  - Example: Frame Relay-To-ATM Bridged Interworking on a Frame Relay-PE Router392
- Gigabit Etherchannel for Virtual Private Wire Service393
  - Supported Modes393
    - Any-To-GEC Mode393
    - GEC Like-To-Like Mode393
  - Restrictions for Gigabit Etherchannel for Virtual Private Wire Service394
- Configuring Gigabit Etherchannel for Virtual Private Wire Service395
- Feature Information for Configuring MPLS Layer 2 Vpns407
  - Rfcs407
  - Technical Assistance407
- Glossary409
Tracing and Trace Management411
- Tracing Overview411
- How Tracing Works411
- Tracing Levels411
- Viewing a Tracing Level411
  - Tracing Levels412
  - Viewing a Tracing Level413
- Setting a Tracing Level414
- Viewing the Content of the Trace Buffer415
Configuring and Accessing the Web User Interface417
- Web User Interface Overview417
- Configuring the Router for Web User Interface Access421
- Authentication and the Web User Interface423
- Domain Name System and the Web User Interface423
- Clocks and the Web User Interface423
- Accessing the Web User Interface424
- Using Auto Refresh425
- Web User Interface Tips and Tricks426
Unsupported Commands427
Appendix A Unsupported Command428
Configuration Examples431
- Tftp Server431
Appendix B Configuration Example432
- Configuring the Router to Boot the Consolidated Package on the TFTP Server432
- Copying the Consolidated Package from the TFTP Server to the Router435
- Configuring the Router to Boot Using the Consolidated Package Stored on the Router436
- Extracting the Subpackages from a Consolidated Package into the same File System437
- Extracting the Subpackages from a Consolidated Package into a Different File System439
- Configuring the Router to Boot Using the Subpackages440
- Backing up Configuration Files444
- Enabling a Second IOS Process on a Single RP Using SSO445
- Issu—Consolidated Package Upgrade449

Cisco ASR1002 - ASR 1002 Router - Page 457

Table of Contents

Other manuals for Cisco ASR1002 - ASR 1002 Router

Related product manuals