Contents
ix
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-11
Sending a Call Home Test Message Manually 24
Sending Call Home Alert Group Messages Manually 24
Submitting Call Home Analysis and Report Requests 25
Sending the Output of a Command to Cisco or an E-Mail Address 27
How To Configure Call Home to Support the Smart Call Home Service 27
Prerequisites 28
Configure and Enable Call Home 28
Declare and Authenticate a CA Trustpoint 31
Examples 33
Start Smart Call Home Registration 33
What To Do Next 34
Displaying Call Home Configuration Information 34
Examples 35
Default Settings 39
Alert Group Trigger Events and Commands 40
Message Contents 42
Sample Syslog Alert Notification in Long Text Format 46
Sample Syslog Alert Notification in XML Format 50
Additional References 57
Related Documents 58
Standards 58
MIBs 58
RFCs 58
Technical Assistance 59
Feature Information for Call Home 59
Configuring Cisco Right-To-Use License 1
Finding Feature Information 1
Contents 1
Prerequisites for Cisco Right-To-Use License 1
Restrictions for Cisco Right-To-Use License 2
Information About Cisco Right-To-Use License 2
Overview 2
Right-To-Use Supported Software Licenses 2
Evaluation and Right-To-Use Licenses 3
How to Activate an Evaluation License 4
Configuration Examples for Right-To-Use Supported Software Licenses 5
Configuring Throughput 6
Example: Accepting Global EULA 6
To Next Page
Need help?
General
