EasyManuals Logo

Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Cisco ASR1006 - ASR 1006 Modular Expansion Base
462 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Contents
xi
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-11
Feature Information for Using the Management Ethernet Interface 8
Network Synchronization Support 1
Finding Feature Information in This Module 1
Contents 1
Network Synchronization Overview 2
Synchronization Status Message and Ethernet Synchronization Messaging Channel 5
Synchronization Status Message 5
Ethernet Synchronization Messaging Channel 5
Clock Selection Algorithm 5
Restrictions and Usage Guidelines 6
Configuring Network Synchronization 7
Configuring Clock Recovery from SyncE 7
Configuring Clock Recovery from a BITS Port 8
Configuring Clock Recovery from BITS Port as an Input-Source 8
Configuring Clock Recovery from BITS Port as an Output-Source 9
Configuring SyncE by Using the Line to External Feature 10
Managing Synchronization on the Cisco ASR 1000 Series Router 11
Verifying the Network Synchronization Configuration 12
Troubleshooting the Network Synchronization Configuration 16
Additional References 18
Related Documents 18
Standards 18
MIBs 18
RFCs 18
Technical Assistance 18
Feature Information for Network Synchronization Support 19
Configuring Bridge Domain Interfaces 1
Finding Feature Information 1
Contents 1
Restrictions for Bridge Domain Interfaces 1
Information About Bridge Domain Interfaces 2
Ethernet Virtual Circuit Overview 2
Bridge Domain Interface Encapsulation 3
Assigning a MAC Address 3
Support for IP Protocols 3
Support for IP Forwarding 4
Packet Forwarding 4

Table of Contents

Other manuals for Cisco ASR1006 - ASR 1006 Modular Expansion Base

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR1006 - ASR 1006 Modular Expansion Base and is the answer not in the manual?

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General IconGeneral
Rack Units6U
Form FactorRack-mountable
Operating Temperature32 to 104°F (0 to 40°C)
Product TypeRouter
Slots6
RedundancyRedundant Power Supply Supported
Maximum Throughput100 Gbps
Dimensions17.5" Width
WeightApproximately 130 lbs (59 kg)
Interfaces/PortsVaries by installed modules
Memory4 GB
Storage Temperature-40°F to 158°F (-40°C to 70°C)
Relative Humidity5% to 95% (noncondensing)
ComplianceCE, UL

Related product manuals