Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Contents
xii
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-11
Layer 2 to Layer 3 4
Layer 3 to Layer 2 4
Link States of a Bridge Domain and a Bridge Domain Interface 5
BDI Initial State 5
BDI Link State 5
Bridge Domain Interface Statistics 5
Creating or Deleting a Bridge Domain Interface 6
Bridge Domain Interface Scalability 6
How to Configure a Bridge Domain Interface 6
Example 8
Additional References 10
Related Documents 10
Standards 10
MIBs 10
RFCs 10
Technical Assistance 10
Feature Information for Configuring Bridge Domain Interfaces 11
Monitoring and Maintaining Multilink Frame Relay 1
Finding Feature Information in This Module 1
Contents 1
Feature Overview 2
Configuring Multilink Frame Relay 2
Monitoring and Maintaining Frame Relay and Multilink Frame Relay 2
Additional References 3
Related Documents 3
Standards 3
MIBs 3
RFCs 3
Technical Assistance 3
Feature Information for Monitoring and Maintaining Multilink Frame Relay 4
Configuring MPLS Layer 2 VPNs 1
Finding Feature Information 1
Contents 1
Overview of L2VPN Interworking 2
L2VPN Interworking Modes 2
Ethernet or Bridged Interworking 2
IP or Routed Interworking 3

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL