Cisco ASR1006 - ASR 1006 Modular Expansion Base User Manual

Configuring Call Home
How to Configure Call Home
16
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
DETAILED STEPS
Renaming a Destination Profile
To change the name of an existing profile, complete the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. rename profile source-profile target-profile
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
call-home
Example:
Router(config)# call-home
Enters call home configuration mode.
Step 3
copy profile source-profile target-profile
Example:
Router(cfg-call-home)# copy profile profile1
profile2
Creates a new destination profile with the same
configuration settings as the existing destination profile,
where:
• source-profile—Specifies the existing name of the
profile.
• target-profile—Specifies a name for the new copy of
the profile.

Cisco ASR1006 - ASR 1006 Modular Expansion Base Specifications

General

Rack Units	6U
Form Factor	Rack-mountable
Operating Temperature	32 to 104°F (0 to 40°C)
Product Type	Router
Slots	6
Redundancy	Redundant Power Supply Supported
Maximum Throughput	100 Gbps
Dimensions	17.5" Width
Weight	Approximately 130 lbs (59 kg)
Interfaces/Ports	Varies by installed modules
Memory	4 GB
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Relative Humidity	5% to 95% (noncondensing)
Compliance	CE, UL