Cisco Catalyst 9200 Series Hardware Installation Guide

APPENDIX B
Switch LEDs
• LEDs, on page 109
• Console LED, on page 110
• System LED, on page 110
• ACTIVE LED, on page 110
• STACK LED, on page 111
• PoE LED, on page 112
• Port LEDs and Modes, on page 112
• Beacon LED, on page 115
• RJ-45 Console Port LED, on page 115
• Fan LED, on page 116
• Uplink Port LEDs, on page 116
LEDs
Switch Front Panel LEDs
You can use the switch LEDs to monitor switch activity and its performance.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
109

Cisco Catalyst 9200 Series Specifications

General

Category	Switch
Stacking Bandwidth	160 Gbps
Layer	Layer 2 and Layer 3
Operating System	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Series	Cisco Catalyst 9200 Series
Ports	24 or 48 Ethernet ports
Switching Capacity	Up to 176 Gbps
PoE	PoE, PoE+, and UPOE
Stacking	StackWise-160
Memory	4 GB DRAM, 4 GB Flash
Network Management	Cisco DNA Center, WebUI, CLI
Security Features	802.1X, TrustSec, MACsec
Warranty	Limited Lifetime Warranty
Dimensions	1.73 x 17.5 x 11.3 in. (4.4 x 44.5 x 28.8 cm)