Cisco Catalyst 9200 Series

Figure 41: Securing the Power Adapter to the Adapter Bracket
Velcro strap2Power adapter1
Installing the Power Cord Retainer (Optional)
This section applies to switches with an AC power connector.
Note
Before you begin
• The power cord retainer (C9K-CMPCT-PWR-CLP) is optional. You can order it when you order your
switch, or you can order it later from your Cisco representative.
Procedure
Step 1 Fix the power cord retainer strap to the switch using the M3 pan-head screw provided.
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
69
Installing a Compact Switch
Installing the Power Cord Retainer (Optional)