Cisco Catalyst 9200 Series Hardware Installation Guide

CHAPTER 4
Installing a Compact Switch
• Shipping Box Contents, on page 49
• Mounting the Switch, on page 51
• Connecting the System Ground, on page 65
• Attaching the Adapter Bracket to the Switch (Optional), on page 66
• Installing the Power Cord Retainer (Optional), on page 69
• Installing the Cable Guard (Optional), on page 71
• Installing an SFP or SFP+ Module, on page 73
• 10/100/1000 PoE and PoE+Port Connections, on page 74
• 10/100/1000/Multigigabit Ethernet Port Connections, on page 75
Shipping Box Contents
The shipping box contains the model of the switch you ordered and other components needed for installation.
Some components are optional, depending on your order.
Verify that you have received these items. If any item is missing or damaged, contact your Cisco
representative or reseller for instructions. Verify that you have received these items. If any item is missing
or damaged, contact your Cisco representative or reseller for instructions.
Note
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
49

Cisco Catalyst 9200 Series Specifications

General

Category	Switch
Stacking Bandwidth	160 Gbps
Layer	Layer 2 and Layer 3
Operating System	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Series	Cisco Catalyst 9200 Series
Ports	24 or 48 Ethernet ports
Switching Capacity	Up to 176 Gbps
PoE	PoE, PoE+, and UPOE
Stacking	StackWise-160
Memory	4 GB DRAM, 4 GB Flash
Network Management	Cisco DNA Center, WebUI, CLI
Security Features	802.1X, TrustSec, MACsec
Warranty	Limited Lifetime Warranty
Dimensions	1.73 x 17.5 x 11.3 in. (4.4 x 44.5 x 28.8 cm)